DIY HEXALEAF NANOLEAF KIT 6.5" PANELS - LED's NOT INCLUDED & ASSEMBLY REQUIRED

This listing is for a 5 or 10 pack of Hexagon shells to be used for DIY LED wall panels.
Included in this listing are the Diffusers 5 or 10 depending on selection (The white hex shape cover that diffuses the light from the LED strip) and The Panel Frames 5 or 10 and black or white depending on selection (These house the LED strip and have a slot on each of the 6 sides to allow you the assembler to run the LED strip in whatever configuration and shape you would like)
LED strip not included in this listing. This is a DIY project you will need to supply your own LED strip.

Now onto important tips and suggestions. We recommend using the Govee 8mm size LED strips as these are what we used when we put these together. 8mm is the widest you will want to go for the LED strip.

To begin it is suggested to do a layout of how you want your design to be. For every 10 panels it will take approximately 5 meters of LED strip. For the 5 pack it will be around 2.5. A 3 meter strip should suffice assuming you have no errors.
In the photos there are 40 total panels. We used a total of 20 meters of LED strip (4x 5 meter strips) 3M command strips were used to attach it to the wall ( NOT INCLUDED )
These panels are 6.5 Inches Wide x 6 Inches Long x 1 Inch Tall - These are significantly larger than your average Hex or Nano panel!
We secured the diffuser to the frame using a small dot of superglue on each inside corner. You can also use superglue or hot glue to obtain the LED strip onto the inner wall of the panel if the adhesive isn't strong enough on the back of the strip as some of them come with a cheap adhesive, having a hot glue gun handy will help with frustration. Securing frames to each other we used superglue and simple wood clamps for 1 minute each.
Here are some Youtube videos showing how these are assembled. https://www.youtube.com/watch?v=2OP-oEbzB6g&t=71s
https://www.youtube.com/watch?v=e_Igg7IKn2g

The pictures provided should give a good example of possible configuration. The shape or design is ultimately entirely up to you and your room or area on how you would like to do it.
Our goal with this project was to provide the ability to have a Nan0leaf setup without the price if you are willing to do a little DIY work. A 10 pack of these and a Govee LED strip can get you that for under $100
WE WANT TO REITERATE - THIS IS A DIY PROJECT - YOU WILL NEED TO SOURCE YOUR OWN LED'S AND ASSEMBLE THIS ON YOUR OWN.

DIY Hexaleaf Nanoleaf Style Hexagon Kit 6.5" Panels Ambient Lighting

Rolling Foot Massager

Diamond Hand Statue & GameStonks Sign Combo Desk Decor